Of course, lengths are customized for each job. A wide range of depths are available, far to many to list here, so please contact your local manufacturer for more information on their offerings - in general depths start at 6' and go up to 30' and beyond. Standard widths are specified in the above publication, but can be customized as needed. The following table comes from the American Institute of Timber Construction's Standard Specification for Structural Glued Laminated Timber of Hardwood Species publication.ДЄNSI/AITC A190.1-1992 allows for any width and depth of glue laminated timber. It is advisable to check with your contractor or lumber supplier before finalizing design details so you aren't surprised by what you receive. However, in some cases, like the big-box hardware stores, the boards come in dimensional widths similar to softwood widths. The Bushnell advance Micro reflex sight 1x5 MOA dot is the smallest, lightest Red dot in the Bushnell AR optics family, and packs big. In most cases, hardwood boards come in random widths to be ripped to size by the woodworker. For more information, WoodVendors recommends: Link: Teak - Additional Pictures and Information. Call Pat or Tom today at 87 to discuss your Teak project. For instance, hardwood trim that ends up being just over 1' thick (surfaced on 2 sides) is called a five-quarter (5/4) board. Base Boards Chair Rail & Wall Mouldings Crown Mouldings Nickel Gap Pattern, Stock, Siding & Flooring PVC & Exterior Rail & Stair Mouldings. Wood Vendors uses only the finest FEQ or First European Quality Teak Lumber for our s4s teak and moulded teak products. In North America, hardwood lumber is usually specified using the quarter system, where a board is identified by its thickness in quarters of an inch. 1x4 S 4 S shall be 31 inches wide, finished 1x5 S 4 S shall be 44. Surfaced refers to a finishing process that smooths the lumber to remove all saw marks. Adopted by the Various Lumber Manufacturing Associations of the United States. Hardwood lumber is sized based on how many sides are surfaced.

1x5 lumber